SPI-10

The SPI-10 connector is a hobbyist-friendly connector standard for SPI. It uses a 2x5 IDC connector. The pin-out (odd-even) is:

1. +3.3V — 3.3v Power
2. GND — Ground
3. AUX — Auxiliary
4. (key, not connected)
5. ~RST — Reset
6. ~IRQ — Interrupt
7. MISO — Master In, Slave Out
8. MOSI — Master Out, Slave In
9. SCLK — Serial Clock
10. ~SS — Slave Select